Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 28 subscribers
  • Views 1953 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Site to Site IPsec VPN Switch GW

MoMx

I know how to use  More than 1 gateway for VPN failover  . but i have strange issue with Site to site VPN . i am using two different gateways and sometimes the VPN disconnect and what ever i do it never restore the connection unless i wait almost 15 minutes to reconnect using same gateway . the only fix it to switch the vpn gateway to use the  second gateway .

put in mind that both gateways are connected to the Internet and online and this issue happen while both gateways are online .  dpd is enabled 

so the only fix i am thinking about is to monitor an IP in the end of the VPN tunnel and switch the gateway for the vpn connection once that IP fail to ping 

so can anyone help in this ?

PS:  i couldn't find any useful info in the logs .  



This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to LuCar Toni

    I tried all versions . and the only solution is to switch the gateway . so i am searching for the command to do that so i can script it 

    switching the gateway mean i manualy edit the vpn config and chose the second gateway then initiate the connection .