Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 11 replies
  • Answers 1 answer
  • Subscribers 28 subscribers
  • Views 5375 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Route Traffic between 2 different Gateways

Manar10

Hello .

 

   Kindly i need any assist with the below issue as it doesn't work on sophos xg 17.5.5 .

Case : 

  I have 2 different sources and 2 different wan gateways on the internet each one of the sources need to access specific websites (controlled through web filter ) through Gateway 1 "primary"and other websites through Gateway 2 "secondary"

- Issue when try to apply that on the network rule and masq the sources with the ip of the primary gateway it doesn't work.and same for the secondary gateway. 

 

Appreciate your help



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    please post a copy of the rules.

    Ian

    XG115W - v19.5.1 mr-1 - Home

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    Here we go the most important part that i can fetch as the above is just the source from lan zone to wan any destination host and web filter profile applied

    there's a wan load balancing between the 2 different gateways and i need to differentiate between both of them as above

  • 0 in reply to Manar10

    Thank you, but that wasn't part I was after. 

    If you want to use different gateways you need to put the gateway in the firewall rule, you need to identify which destination as well.

    Ian

    XG115W - v19.5.1 mr-1 - Home

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    That definitely happened while creating any rule on sophos ,but it's not on working on XG.

    Is there any suggestion

  • 0 in reply to Manar10

    I don't fully understand what you are saying, but it does imply you have a configuration error.

    Please post the offending firewall rules.

    Ian

    XG115W - v19.5.1 mr-1 - Home

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    let me explain again i have 2 routers apply on them load balancing 

    Zone : Lan   Source : host 192.168.1.0/24

    Zone : Wan   Destination : Any host

    webpolicy : "profile applied to specific URLs" 

    As per the screenshot i need to select "instead of wan link load balancing" for the gateway the 1st one and masq the traffic with it.

     

    Same happened on the second rule for the 2nd gateway 

     

    hope that's clear enough to mention what i need 

  • 0 in reply to Manar10

    You should get a drop menu showing you both gateways, the default is load balance even if you only have one gateway.

    Ian

    XG115W - v19.5.1 mr-1 - Home

    If a post solves your question please use the 'Verify Answer' button.

Reply Children
Cookie Information Banner