VPN to VPN Communication

Is SSLVPN in the Local Network of IPsec? 

Without this switch, XG cannot build a SA for routing etc. 

A bit confused with the response. SSLVPN is using the built in DHCP range (10.81.234.0/24) and has both the Local LAN(10.24.0.0/16) and the Network(10.26.0.0/24) on the remote side of the IPSEC vpn under the Permitted networks under SSLVPN settings. 

IPSEC remote side can access the Local LAN with no issues and SSLVPN can see the same, they just cant see each other. 

Does this require a static route? If so how would i configure this seeing as I only have one real gateway. 

A bit confused with the response. SSLVPN is using the built in DHCP range (10.81.234.0/24) and has both the Local LAN(10.24.0.0/16) and the Network(10.26.0.0/24) on the remote side of the IPSEC vpn under the Permitted networks under SSLVPN settings. 

IPSEC remote side can access the Local LAN with no issues and SSLVPN can see the same, they just cant see each other. 

Does this require a static route? If so how would i configure this seeing as I only have one real gateway. 

I would assume you have to build the SA between the remote IPsec Network and your SSLVPN Network.

So basically insert the SSLVPN Network (10.81.234.0) into the Local Network of IPsec (like the LAN Network).

Added this with NO change. 

Are you using the 'automatic rules' option? If not, you need a VPN -> VPN zone rule. 

Additionally this change has to be made on both sides, make sure the other side is updated in their remote subnets as well.