Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 27 subscribers
  • Views 746 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

HOW TO ENABLE AUTO FAIL OVER USING 2 WAN IPVPN NETWORK AND MPLS NETWORK OR USE BOTH

Speck07

WE HAVE ALREADY ESTABLISH A WHOLE NETWORK USING SOPHOS FIREWALLS.

 

I WANT TO ENABLE OR USE BOTH IPVPN AND MPLS OR AUTO FAIL OVER ONCE 1 LINE IS DOWN.

 

APPRECIATE ANSWERS OR SUGGESTION IF SOMEONE CAN HELP ME



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    very easy, you put the second link in the gateway, could take some time if you have a number of rules.

    You then setup testing in the Network -> WAN link to determine when a link fails.

    Now there is one drawback no automatic restore to primary link.

    If you search the forums you will find another thread on a similar subject with additional answers.

    Ian

Reply
  • 0

    Hi,

    very easy, you put the second link in the gateway, could take some time if you have a number of rules.

    You then setup testing in the Network -> WAN link to determine when a link fails.

    Now there is one drawback no automatic restore to primary link.

    If you search the forums you will find another thread on a similar subject with additional answers.

    Ian

Children
No Data