Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 26 subscribers
  • Views 770 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XG Fireall - SIpgate issue, if sip_module is enabled

ChrisGER

hello community,
i have the probem with every sophos firmware update that sip_module is reactivated, so the telephony is completely offline :(
so i've configured the PBX behind the XG for using sip alg to avoid the firmware update feature :)
 
but...
Sipgate is not running and the VoIP to sipgate is down :(
the posts i found had links to nonexisting pages at sipgate, cause perhapse uotdated.
 
Any experiance what is additional required to re-enable sipgate VoIP, if SIP module on XG is enabled.
 

thx forward to the community
Chris



This thread was automatically locked due to age.
Parents
  • 0

    Hi community,

    during the ALG enabled phase, it takes several issues that are not clear in the "ALG enabled mode" and had sideeffects :(
    I've disabled the SIP-ALG by command and the issue is gone :(

    Is there a workarround, that the module will be not reenabled by a firmware update at the XG ?

    Thx and best regards
    Chris

Reply
  • 0

    Hi community,

    during the ALG enabled phase, it takes several issues that are not clear in the "ALG enabled mode" and had sideeffects :(
    I've disabled the SIP-ALG by command and the issue is gone :(

    Is there a workarround, that the module will be not reenabled by a firmware update at the XG ?

    Thx and best regards
    Chris

Children
No Data