Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 19 replies
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 12466 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XG for home - CPU usage 100% issue

Jason Etten

How do I determine what is causing the CPU to go to 100%? I restarted the FW and the CPU jumps to 100%. I can't get it to go any lower.

 

I am using 17.5.3 MR-3. 

Not sure how long this has been going on. The CPU usage is causing the internet browsing to be slow. I turned off web filtering.

The logs take about 5 to 10 min to display data.

I don't know how to figure out what is causing it. The web interface is really slow, almost unresponsive. 

 

I have access to the console but I do not have SSH setup.



This thread was automatically locked due to age.
Parents
  • 0

    Ok, I am trying to narrow this down. Not sure what is possible.

     

    I have been monitoring the CPU spike all day. 

    I have a Windows 10 PC running and when I see a spike in CPU usage I unplug that PC from the internet.

    When I do this a few min later the avd process goes away and the CPU is at normal level.

     

    So far two times today I have been able to do this.

     

    Is this a coincidence? 

    How would I narrow down the process or program that is causing the issue on the PC?

  • 0 in reply to Jason Etten

    I thought I narrowed down the PC but I was wrong. The CPU was maxed out by the avd process and I unplugged the PC I thought was the issue. This did not resolve the problem. 

    I had to turn off "scan HTTP" rom my firewall rule.

     

    I turned on the option and everything seems to be running fine.

     

    How can I detemrine what is being scanned that is causing the issue?

Reply
  • 0 in reply to Jason Etten

    I thought I narrowed down the PC but I was wrong. The CPU was maxed out by the avd process and I unplugged the PC I thought was the issue. This did not resolve the problem. 

    I had to turn off "scan HTTP" rom my firewall rule.

     

    I turned on the option and everything seems to be running fine.

     

    How can I detemrine what is being scanned that is causing the issue?

Children