Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 27 subscribers
  • Views 1804 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Redirect outbound traffic to inbound

mkysoft software

We use fiber internet with special ISP modem, it is not support NAT. We can forward all traffic for ports to specific IP only in modem. Modem using 192.168.20.1 for LAN IP. We assign 192.168.20.3 IP to XG port3 and forward all traffic to this IP. All other functionality working as expected. But we can't handle outbound to traffic to our public IP (loop back problem). Is there any chance to redirect outbound traffic which are target is public IP to 192.168.20.3 or progress as inbound traffic?

Public IP --> Modem (192.168.20.1) --> XG (192.168.20.3)

I try to assigning public IP to XG another port, not working (no cable plugged).



This thread was automatically locked due to age.
Parents
  • 0

    As far as i know, this is not possible right now. 
    NAT is not supported to work from LAN to WAN and redirect to other destinations. 

    (So basically WAN ANY to LAN etc.) 

     

    I notice some work progress on this limitation for V18, but i do not know, if this will actually be resolved. 

     

Reply
  • 0

    As far as i know, this is not possible right now. 
    NAT is not supported to work from LAN to WAN and redirect to other destinations. 

    (So basically WAN ANY to LAN etc.) 

     

    I notice some work progress on this limitation for V18, but i do not know, if this will actually be resolved. 

     

Children