This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP to traffic

Hi,

 

I have an XG (latest firmware) with a lot APs and all work great. Recently I installed a new switch (Mikrotik CRS317) into the network, it also works fine, except for any Sophos AP connected to it. So if I move a working AP to the new Mikrotik switch, it still connects to the XG, a client can connect and obtain IP as usual, but there is no traffic.

I tried to play with MTU on the wireless network but no success to have wireless traffic when the AP is connected through the new switch.

Any thoughts? Thanks in advance.



This thread was automatically locked due to age.
Parents Reply
  • No routing (runs SwOS) but VLANs yes, actually the APs are on a separate VLAN. Because the Mikrotik switch has optical ports I connected one AP to the management port (set to the right VLAN for AP) and also to another access switch connected optically to the 317 and got no traffic. This access switch, if connected somewhere else, permits traffic from the AP. And again the AP itself works just fine with or without the Mikrotik 317.

Children