Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 27 subscribers
  • Views 767 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

2 Datacentres, 3 Sohpos appliances, IPSec

Allan Pumphrey

Hi, 

 

I have a sophos XG210 in Datacentre A with a lan IP os 10.101.3.0/24

In Datacentre B I have a XG210 with a DMZ of 10.101.105.0/24

Datacentra A and B are connected using IPSEC

 

The problem is that in Datacentere B I have another firewall layer between the DMZ and LAN that has a LAN ip or 10.101.5.0/24

 

Can anyone tell me how I can connect Datacentre A's 10.101.3.0/24 with Datacentre's B Lan 10.101.5.0/24?

 

With IPSec I can ping from 10.101.3.0/24 and reach 10.101.105.0/24 so I just need that last route/rule to get it from 10.101.105.0/24 to 10.101.5.0/24

 

Much appreciated

 



This thread was automatically locked due to age.
Parents
  • +1

    Hello Allan,

    I have a question about your requirement since there is a firewall between 10.101.105.0 amd10.101.5.0 then that firewall should manage the communication. How is this traffic related to IPsec?

    If you want network10.101.3.0/24 to communicate with 10.101.5.0/24, then you may add a network source in IPsec connection profile on site B as 10.101.5.0 and on-site A the destination network 10.1015.0/24 is needed to be added.

Reply
  • +1

    Hello Allan,

    I have a question about your requirement since there is a firewall between 10.101.105.0 amd10.101.5.0 then that firewall should manage the communication. How is this traffic related to IPsec?

    If you want network10.101.3.0/24 to communicate with 10.101.5.0/24, then you may add a network source in IPsec connection profile on site B as 10.101.5.0 and on-site A the destination network 10.1015.0/24 is needed to be added.

Children
No Data