Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 11 replies
  • Subscribers 27 subscribers
  • Views 2199 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

i have installed XG firewall home edition but can't access

vaibhav katkar

i have installed XG firewall home edition but con't access 

https://172.16.16.16:4444/

i am using HP proliant ML 10 Gen 9

8 GB RAM , 1 TB HDD, E 3 series Prosser 

 

please do the needful. 



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    how many interfaces have you enabled and are you using the internal interface? Have you tried connecting to one of the other interfaces?

    Ian

    XG115W - v19.5.1 mr-1 - Home

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    Hi,

     

    i am using 4 port LAN hp network interface card 

  • 0 in reply to vaibhav katkar

    Hi,

    have you setup the IP address of the PC you are trying to connect to the XG with to have a 172.16.16.x/24 address?

    Have you tried connecting to each port on the XG to see which are alive?

    When you installed the software which ports did the installation process show you as being assigned eg woulf=d have been the two you had ethernet cables connected to.

    I assume you did an installation on the HP hardware not on the installed OS?

    Ian

    XG115W - v19.5.1 mr-1 - Home

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    Hi Sir,

    i had fresh installation 2 times but steel facing same issue

    please find blow snap shot 

  • 0 in reply to vaibhav katkar

    Hi,

    let us go to the beginning.

    You need to ensure you have a live connection on at least two ports, one for internal (LAN) and one for external (WAN).

    Then you start your installation and during installation you will be asked which port to use for your LAN.

     

    Ian

    XG115W - v19.5.1 mr-1 - Home

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0 in reply to vaibhav katkar

    Hi,

    let us go to the beginning.

    You need to ensure you have a live connection on at least two ports, one for internal (LAN) and one for external (WAN).

    Then you start your installation and during installation you will be asked which port to use for your LAN.

     

    Ian

    XG115W - v19.5.1 mr-1 - Home

    If a post solves your question please use the 'Verify Answer' button.

Children
Cookie Information Banner