In our primary site, we have a dedicated internet connecton for access to a third party system. This connection is used solely for access to this system.
All traffic to that system from our branch offices is routed over a site-to-site IPSec VPN to the primary office and then out over the dedicated connection.
We have 3 offices set up this way.
I've just added a new site with what appears to be the same config as the others, however I'm having an issue in that HTTP traffic works but HTTPS traffic does not.
Logs and Packet Capture seem to show that the connections are in place between source and destination and vice versa but i'm not sure how to interpret if they show a problem or not.
Trying to figure out if it's a problem with the XG Config or if there is an issue wth the config on the 3rd Party's router.
Site A (Primary) - XG 210 - 17.1.4 MR-4
Interface for 3rd Party connection is setup as it's own LAN Zone.
Static Route in place to route traffic to 3rd Party Subnet to gateway for dedicated connection.
3rd Party network is classed as local subnet on VPN policy
Firewall policy in place to allow all traffic from VPN Zone (Site B Subnet) > Custom Zone (3rd Party Subnet) and Primary Gateway is that of the dedicated connection.
No additional services are configured on the policy (IPS, Traffic Shaping, etc). Masquerading is not configured.
Site B (Branch) - XG 115 - 17.1.4 MR-4
3rd Party network is classed as remote subnet on VPN policy.
Firewall policy in place to allow all traffic from LAN (Site B Subnet) > VPN (3rd Party Subnet).
No additional services are configured on the policy (IPS, Traffic Shaping, etc). Masquerading is not configured.
Hopefully someone can shed some light on it before I pull out what little hair I have left!!
Thanks
This thread was automatically locked due to age.