We have 3 locations all of which are connected via VPN to each other. Our routers are on the exisiting subnet in each location, and the XG firewalls are in bridge mode. With Port 1 being the LAN port and port 2 being the WAN port.
Location 1 192.168.1.0/24 with router on 192.168.1.1
Location 2 192.168.2.0/24 with router on 192.168.2.1
Location 3 192.168.3.0/24 with router on 192.168.3.1
We are adding an additional WAN link in locations 1 and 2 and want to use the existing links for internal traffic only. Since they will eventually be moved over to MPLS instead of VPN.
So in location 1 i deleted the bridge and created the LAN and WAN ports for the existing connection. I also added the new WAN link on port 3 which is using DHCP from the new router on a different subnet. After this is done i can ping out on both WAN links, and i created a test firewall rule at the top passing all traffic over 1 link and it works for both. Including the VPN links on port 2.
I then created a new firewall rule underneath this and told it to pass all LAN to WAN traffic for destination IP's 192.168.2.0-255, and 192.168.3.0-255 on port 2. Then our existing firewall rules below this to use port 3. However once i disable the test firewall rule, and have it use these all traffic stops. I can no longer talk to anything from my client with the default gateway set to the lan port of the XG firewall.
So i am getting lost on how to fix this issue. I tried creating a static route for 192.168.2.0/24 and 192.168.3.0/24 traffic to port 2. However that didn't work either. Any help on this would be appreciated.
This thread was automatically locked due to age.