Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 7 replies
  • Answers 1 answer
  • Subscribers 28 subscribers
  • Views 5320 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Help me with static routing.

Greg Rogers

I'll try to explain this as easy as possible.

I have two internet connections with 5 static ips on each connection. I have a Cisco router (A: 10.0.1.1) and Sophos XG 135 (B: 192.168.10.1). Both routers have a public IP to each internet connection. Both routers are connected to the same switch.

I need to setup a static route between A and B.

How would I go about this in the Sophos?

 

I'm guessing I'd go to configure -> routing -> static routing and add a ipv4 unicast route with the dest of 10.0.1.0/24 and gateway of 192.168.10.2 with a distance of 1?

Is there anything else I need to do after that to be able to talk to devices at 10.0.1.0/24 from 192.168.10.0/24?



This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to rfcat_vk

    The cisco has a VPN connection to servers with another company. The cisco also has 2 other subnets we will need to communicate with. So your solution makes no sense.

     

     

    Also doesn't "Both routers have a public IP to each internet connection" do the same as to what you said?

Children
No Data