Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 4 replies
  • Answers 2 answers
  • Subscribers 30 subscribers
  • Views 6597 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

selection of SSL VPN listening interface

Mykhailo Karvatskyi

I have Sophos XG210 (SFOS 17.1.3 MR-3) with WAN1 and WAN2 interfaces. Both WAN1 and WAN2 belong to zone WAN. WAN1  is much faster then WAN2 and I'd like to know if there's any way to force SSL VPN users go through WAN1 only when accessing our internal resorces without dropping packets for WAN2? 



This thread was automatically locked due to age.
Parents
  • 0

    Hello

    To resolve this issue via edit your SSL VPN config File (.ovon) And you have to remove all the remote IP except the IP of wan 1.

    The second method to do that via changing IP/Hostname  

    you also need to change VPN settings And DDNS:

    1. You have to configure VPN to you hostname
    2. and for DDNS you have to use dynamic DNS there 

    Hope this will help you

    Thanks

Reply
  • 0

    Hello

    To resolve this issue via edit your SSL VPN config File (.ovon) And you have to remove all the remote IP except the IP of wan 1.

    The second method to do that via changing IP/Hostname  

    you also need to change VPN settings And DDNS:

    1. You have to configure VPN to you hostname
    2. and for DDNS you have to use dynamic DNS there 

    Hope this will help you

    Thanks

Children
No Data