Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 17 replies
  • Answers 2 answers
  • Subscribers 30 subscribers
  • Views 19218 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Not able to pass traffic between VLANs

Alex_B

I've been pulling my hair out for a while. I'm trying to pass traffic between my untagged lan and a VLAN, both in the same LAN zone.

Port A: 192.168.51.2/24
Port A.60: 192.168.60.1/24

Based on others having similar issues, I created IP Network objects for each subnet and made a rule to pass all traffic: 

Still 192.168.51.0/24 cannot ping 192.168.60.0/24. Both can reach the firewall and WAN fine, and receive DHCP from the firewall.



This thread was automatically locked due to age.
Parents
  • 0

    Confirm that VLAN's are assigned to the LAN interface Network>Interface. Paste screenshot.

    Place this rule at the top of all rules

    Please paste the screenshot of the Network Object definition here. It should cover the full subnet.

    From on of the IP's on VLAN1 - are you able to ping the VLAN2 gateway IP address ?

  • 0 in reply to AB5g

    Ok, trying both of what ya'll said. I had both src/dst IP sets in the rule trying to make it one, but I tried splitting it up again:

    Here's the relevant config I could find. 

Reply Children
No Data