Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 5 replies
  • Subscribers 28 subscribers
  • Views 8506 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

NAT into remote VPN network

Fred12

I have a running VPN Site to Site with this setup:

local network: 172.20.0.0/24
remote network 172.21.0.0/24

traffic between the 2 networks is passing as expected.

Now I like to access the remote network from another local network 172.16.0.0/16. Therefore, I do not want to route this network via VPN but using nat.

I have created a Nat policy with the host 172.20.0.200.

As Sophos has no interface for VPN (internal it may has one)  I don’t know how to route traffic to VPN-NAT.



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    your VPN is a zone, so your VPN connection should use zone VPN.

    Ian

    XG115W - v19.5.1 mr-1 - Home

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    Thanks for reply,


    I've no idea what you want me to do.

    All VPN's (there are many configured) are in the zone VPN and routing to a zone is not possible...

    intention is to hide local 172.16.0.0/16 network for remote site

    source ip's from 172.16.0.0/16 should be NATed. On this dedicated remote site all NATed traffic should come from source 172.20.0.200/32.

Reply
  • 0 in reply to rfcat_vk

    Thanks for reply,


    I've no idea what you want me to do.

    All VPN's (there are many configured) are in the zone VPN and routing to a zone is not possible...

    intention is to hide local 172.16.0.0/16 network for remote site

    source ip's from 172.16.0.0/16 should be NATed. On this dedicated remote site all NATed traffic should come from source 172.20.0.200/32.

Children
Cookie Information Banner