Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 5 replies
  • Subscribers 28 subscribers
  • Views 8506 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

NAT into remote VPN network

Fred12

I have a running VPN Site to Site with this setup:

local network: 172.20.0.0/24
remote network 172.21.0.0/24

traffic between the 2 networks is passing as expected.

Now I like to access the remote network from another local network 172.16.0.0/16. Therefore, I do not want to route this network via VPN but using nat.

I have created a Nat policy with the host 172.20.0.200.

As Sophos has no interface for VPN (internal it may has one)  I don’t know how to route traffic to VPN-NAT.



This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to rfcat_vk

    I think, this wont work. Because if you want to use NAT in a IPsec Policy, you have to configure it in the IPsec Connection.

    But correct me if i am wrong. 

    __________________________________________________________________________________________________________________

Children
  • 0 in reply to LuCar Toni

    Hi MBP,

    I will bow to your greater wisdom. I was only pointing out that his VPN should (would) in the VPN zone if setup correctly and he should use that zone. He was talking about no zone for his VPN.

    Ian

    XG115W - v19.5.1 mr-1 - Home

    If a post solves your question please use the 'Verify Answer' button.

Cookie Information Banner