WAN interface with VLAN TAG

Hi MarcoTeixeira,

To configure vLAN on any interface first you need to assign any Network Zone and select IP Assignment to DHCP. Now you can go and add vLAN interface.

Kindly refer KBA

Regards, Ronak.

This KBA is for VLAN on the LAN interface.

We have the same issue. Our ISP requires a VLAN tag on the WAN interface.

I have configured a VLAN interface on the physical WAN interface - this has the STATIC IP details and the VLAN TAG

On the WAN link manager this connects fine.

However, the WAN port has been configured as WAN using DHCP - this shows as not connected in the WAN link manager.

No traffic flows from the WAN port onto our LAN ? Do we need to configure further firewall rules to allow this to happen.

Hello Mark Stapleton

You will need firewall rule for every traffic. If you want to allow traffic from one zone to other or one interface to another.

Regards, Ronak.

But both the VLAN and the WAN are on the same Physical port ?

Can you provide me with an example ?

You can use PPPoE as a mode with DHCP and "Preference IP" plus VLAN ID.

This won't work as we only have Static IP details from the ISP (no PPoE login)

This won't work as we only have Static IP details from the ISP (no PPoE login)

Hi Mark ,

The configuration shown below should work.