Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 13 replies
  • Answers 4 answers
  • Subscribers 32 subscribers
  • Views 21231 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

WAN interface with VLAN TAG

MarcoTeixeira

I need to that my WAN Interface on a XG 115 is consigured with a VLAN TAG ID. 

 

On the  SG I manage to do it, but now in the XG i'm not finding how it can be done. 

Thank you. 



This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to Christopher Gertig

    Hi Crishtopher. Thank you for your reply.

     

    What I have done in the SG was this (answer given in this forum). It worked fine.

    "Per your screenshot you are using a static IP address, no PPPoE involved. In that case, as dirkkotte pointed out, you would set your WAN interface as type "Ethernet VLAN", bind it to a hardware port (eth1, eth2, etc) and set 20 at "VLAN Tag". Other than that it's just IP addresses, gateways and netmasks as usual.

    Per your screenshot you are using a static IP address, no PPPoE involved. In that case, as dirkkotte pointed out, you would set your WAN interface as type "Ethernet VLAN", bind it to a hardware port (eth1, eth2, etc) and set 20 at "VLAN Tag". Other than that it's just IP addresses, gateways and netmasks as usual."