Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 26 subscribers
  • Views 3236 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Wan Link Load Balacing

Deepak Handa

I am having XG230 with active-active link load balancing and latest firmware. Made a firewall rule from lan to wan and selected wan link load balacing.
In the wan link manager option, both the gateway weight is same ie 1.Now while testing on the client pc if i make wan1 down, internet works fine from the wan2. Then i make wan1 interface up. Once both the links are stable after 15 min, i made wan2 interface down, then whole internet traffic stops working. While looking at the log viewer it mentions 'Could not associate packet to any connection'

Any suggestions



This thread was automatically locked due to age.
Parents
  • 0

    Hi Deepak,

    When you did this test, what was the status of the WAN1 interface? Is the Gateway Type set to Active during failovers? What firmware version resides on the XG at present?

    Show me screenshots from WAN Link Manager and the Gateway configuration for the two interfaces. 

    Thanks,

Reply
  • 0

    Hi Deepak,

    When you did this test, what was the status of the WAN1 interface? Is the Gateway Type set to Active during failovers? What firmware version resides on the XG at present?

    Show me screenshots from WAN Link Manager and the Gateway configuration for the two interfaces. 

    Thanks,

Children
No Data