This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SG135w WLAN Problem

Hallo,

 

eine SG135w bereitet mir seid ein paar Tagen Kopfschmerzen. WLAN eingerichtet, aber keiner der Clients bekommt eine Verbindung aufgebaut. Das SophosGuest Netz klappt ohne weiteres.

Ich habe schon mit allen Optionen rauf und unter gespielt, die aktuelle Firmware 9.508-10 nachinstalliert, aber alles unverändert.

Ausgabe im Log bleibt immer unverändert, als ob die Änderungen der Einstellungen nicht zeihen würden:

2018:03:03-15:41:43 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx IEEE 802.11: authentication OK (open system)
2018:03:03-15:41:43 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx MLME: MLME-AUTHENTICATE.indication(b4:f1:da:xx:xx:xx, OPEN_SYSTEM)
2018:03:03-15:41:43 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx MLME: MLME-DELETEKEYS.request(b4:f1:da:xx:xx:xx)
2018:03:03-15:41:43 UTM01 hostapd: wifi1: AP-STA-AUTH b4:f1:da:xx:xx:xx0
2018:03:03-15:41:43 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx IEEE 802.11: authenticated
2018:03:03-15:41:43 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx IEEE 802.11: authenticated
2018:03:03-15:41:43 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx IEEE 802.11: association OK (aid 2)
2018:03:03-15:41:43 UTM01 hostapd: wifi1: AP-STA-ASSOC b4:f1:da:xx:xx:xx0
2018:03:03-15:41:43 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx IEEE 802.11: associated (aid 2)
2018:03:03-15:41:43 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx IEEE 802.11: associated (aid 2)
2018:03:03-15:41:43 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx MLME: MLME-ASSOCIATE.indication(b4:f1:da:xx:xx:xx)
2018:03:03-15:41:43 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx MLME: MLME-DELETEKEYS.request(b4:f1:da:xx:xx:xx)
2018:03:03-15:41:43 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx WPA: event 1 notification
2018:03:03-15:41:43 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx WPA: start authentication
2018:03:03-15:41:43 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx IEEE 802.1X: unauthorizing port
2018:03:03-15:41:43 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx WPA: sending 1/4 msg of 4-Way Handshake
2018:03:03-15:41:44 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx WPA: EAPOL-Key timeout
2018:03:03-15:41:44 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx WPA: sending 1/4 msg of 4-Way Handshake
2018:03:03-15:41:45 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx WPA: EAPOL-Key timeout
2018:03:03-15:41:45 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx WPA: sending 1/4 msg of 4-Way Handshake
2018:03:03-15:41:46 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx WPA: EAPOL-Key timeout
2018:03:03-15:41:46 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx WPA: sending 1/4 msg of 4-Way Handshake
2018:03:03-15:41:47 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx WPA: EAPOL-Key timeout
2018:03:03-15:41:47 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx WPA: PTKSTART: Retry limit 4 reached
2018:03:03-15:41:47 UTM01 hostapd: wifi1: AP-STA-WPA-DISCONNECT b4:f1:da:xx:xx:xx2
2018:03:03-15:41:47 UTM01 hostapd: id="4105" severity="info" sys="System" sub="WiFi" name="STA WPA failure" ssid="WLANSSID" ssid_id="WLAN1" bssid="00:1a:8c:xx:xx:xx" sta="b4:f1:da:xx:xx:xx" reason_code="2"
2018:03:03-15:41:47 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx WPA: event 3 notification
2018:03:03-15:41:47 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx IEEE 802.1X: unauthorizing port
2018:03:03-15:41:47 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx MLME: MLME-DEAUTHENTICATE.indication(b4:f1:da:xx:xx:xx, 2)
2018:03:03-15:41:47 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx MLME: MLME-DELETEKEYS.request(b4:f1:da:xx:xx:xx)
2018:03:03-15:41:52 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx IEEE 802.11: deauthenticated due to local deauth request
2018:03:03-15:41:52 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx IEEE 802.11: deauthenticated due to local deauth request
2018:03:03-15:41:57 UTM01 hostapd: wifi1: STA b4:f1:da:xx:xx:xx IEEE 802.11: authentication OK (open system)

 

Hat jemand noch eine Idee?

 

Vielen Dank!



This thread was automatically locked due to age.
  • Hallo Geo,

    Erstmal herzlich willkommen hier in der Community !

    (Sorry, my German-speaking brain isn't creating thoughts at the moment. [:(])

    What happens if you change the WPA2 password to be strictly alphanumeric?

    MfG - Bob (Bitte auf Deutsch weiterhin.)

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • Hey BAlfson,

     

    I found the solution maybe 20 minutes ago. A UTM with internal WiFi need a bridge if you use "bridged to AP LAN" mode.

     

    Lösung bei diesem Problem war die fehlende Bridge bei "bridged to AP LAN" Modus.

    https://community.sophos.com/kb/en-us/122080

     

    Besten Dank und Grüße

     

    Entertain und TV ist die neue Baustelle. :-)