Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 29 subscribers
  • Views 32429 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How configure the MGMT port?

dexternica

Hello.

In CONFIGURE > NETWORK > INTERFACES, I can't see the MGMT Port, obviously exist physically.

This Port is usable? or is a decoration.

I have SFOS 17.0.5 MR-5

Greetings.



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    I assume you are using XG hardware and talking about the console port?

    The port is usable with a terminal plugged in no accessible from with the XG.

    Ian

  • 0 in reply to rfcat_vk

    Hi,

    From Advanced Shell, I've seen something interesting in /static/pciconf, exactly in files nameif_XG430_WP01.conf and nameif_XG430_WP02.conf, in second file not appear nothing about MGMT Port.

    XG430_WP02_SFOS 17.0.5 MR-5# cat static/pciconf/nameif_XG430_WP01.conf
    4
    slot_0=0000:00:1c.0,PortB1,PortB2,PortB3,PortB4,PortB5,PortB6,PortB7,PortB8
    slot_1=0000:00:01.1,PortC1,PortC2,PortC3,PortC4,PortC5,PortC6,PortC7,PortC8
    slot_2=0000:00:01.0,PortA1,PortA2,PortA3,PortA4,PortA5,PortA6,PortA7,PortA8
    slot_m=0000:00:1c.4,PortMGMT

    XG430_WP02_SFOS 17.0.5 MR-5# cat static/pciconf/nameif_XG430_WP02.conf
    11
    slot_0=0000:00:1c.0,Port1
    slot_1=0000:00:1c.1,Port2
    slot_2=0000:00:1c.2,Port3
    slot_3=0000:00:1c.3,Port4
    slot_4=0000:00:1c.4,Port5
    slot_5=0000:00:1c.5,Port6
    slot_6=0000:00:1c.6,Port7
    slot_7=0000:00:1c.7,Port8
    slot_8=0000:00:1d.0,Port9,Port10
    slot_9=0000:00:01.0,PortB1,PortB2,PortB3,PortB4,PortB5,PortB6,PortB7,PortB8
    slot_10=0000:00:01.1,PortA1,PortA2,PortA3,PortA4,PortA5,PortA6,PortA7,PortA8
  • 0 in reply to dexternica

    Hi,

     

    HA enabled? 

    Did you use the initial wizard at startup - He will create a bridge between Port1 and PortMGMT.

  • 0 in reply to LuCar Toni

    Hi,

    Thanks for your response.

    HA is disabled.

    I use only a XG hardware appliance.

    I used the initial wizard at startup and the MGMT physical Port didn't appear in the list.

    And the port blink when I connect a cable.

  • 0 in reply to dexternica

    Can you check your current setup, if you have a Bridge instead of Port1? 

    Would recommend you to open a Support Case.

    Saw another appliance couple days ago with the same behavior. Needs to be check by support. 

Reply Children