Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 27 subscribers
  • Views 10186 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VPN Bandwidth report?

ZaneDonaldson

Hey All,

 

I'm trying to find out how much data is flowing across a particular ipsec vpn link between two offices within a 24-hour period.  Can anyone point me to the proper report for this info?

 



This thread was automatically locked due to age.
Parents
  • 0

    Hi Zane,

    if you have logging enabled on the port you should see the traffic in the daily executive report assuming you only have 1 vpn.

    Ian

  • 0 in reply to rfcat_vk

    rfcat_vk said:

    Hi Zane,

    if you have logging enabled on the port you should see the traffic in the daily executive report assuming you only have 1 vpn.

    Ian

     

     

    also, I just looked at the executive report.  it shows the following information which appears to be related to L2TP, not IPSEC:

    VPN
     
    VPN connections :
    17
     
    VPN traffic (L2TP,PPTP) :
    0 B
  • 0 in reply to ZaneDonaldson

    Hi Zane,

    to get this feature you will need to create a feature request and I don't have the url for that site.

    This is messy but should get you your answer for a one off report, again referring to the executive report, total all the IP addresses that use the tunnel. There is no export in any format other than PDF that I can see. Trouble with this approach is no time frames.

    Ian
    Further thoughts. Look under reports on the main tab then VPN that might help.

Reply
  • 0 in reply to ZaneDonaldson

    Hi Zane,

    to get this feature you will need to create a feature request and I don't have the url for that site.

    This is messy but should get you your answer for a one off report, again referring to the executive report, total all the IP addresses that use the tunnel. There is no export in any format other than PDF that I can see. Trouble with this approach is no time frames.

    Ian
    Further thoughts. Look under reports on the main tab then VPN that might help.

Children
  • 0 in reply to rfcat_vk

    In order to wrap this up:  I opened a case with tech support.  They have no reports or logging to offer that would give me this information.  They offered no work-around or cli command to get this information, so at this point its safe to say there is no way to retrieve the bandwidth utilization on a IPSEC tunnel

     

    I'm guessing if this had been a RED tunnel, I might have been able to get that information due to the fact that RED tunnels create a virtual port against which I could collect the data. Or possibly if this tunnel was in its own zone, maybe?