Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 6 replies
  • Subscribers 28 subscribers
  • Views 10941 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Help Sophos XG - Interfaces

Caio Silva

Hello,

I would like some help with Sophos XG. I have this setup running in Sophos UTM and I'm looking to migrate Sophos XG.

I have a Switch with 2 Vlans (20 and 30) in TRUNK with porta (PORT1) Sophos XG

I want to make the following configuration in XG:

PORT1.20 (Vlan 20): Network 192.168.20.0/24
PORT1.30 (Vlan 30): Network 192.168.30.0/24

But unlike the Sophos UTM version, Sophos XG forces me to configure the PORT1 (No Vlan). What would be the best configuration in this scenario?

Thank you!



This thread was automatically locked due to age.
Parents
  • 0

    Caio,

    at home I have the exact configuration. You cannot on XG assign a default VLAN on physical port, but the port needs an IP address in VLAN ID 1. No way to change default VLAN. For Enterprise deployment this is a big issue and I am still using UTM on Enterprise Customers whom require that.

    For home, configure the physical port and then add 2 additional VLANs as required.

Reply
  • 0

    Caio,

    at home I have the exact configuration. You cannot on XG assign a default VLAN on physical port, but the port needs an IP address in VLAN ID 1. No way to change default VLAN. For Enterprise deployment this is a big issue and I am still using UTM on Enterprise Customers whom require that.

    For home, configure the physical port and then add 2 additional VLANs as required.

Children