Guest User!

You are not Sophos Staff.

Thread Info
  • State Verified Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 2 replies
  • Subscribers 1 subscriber
  • Views 1581 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

CR25wi problem with droped packets

Abdelftah Elshafey

week ago trying to understand the packet drop problems 

not even understand what does no gatway in gatway id 

could some one give suggestion



This thread was automatically locked due to age.
Parents
  • +1

    Hi  

    The provided packet capture is for Port 53 UDP for DNS request and when there is an incoming packet from the user system the packet capture will not show any gateway ID because as per the architecture when the packet sent out from the WAN IP/Interface the Gateway ID will mark. You can see that the forwarded packet has gateway ID marked. This is the behavior of the Cyberoam OS.

Reply
  • +1

    Hi  

    The provided packet capture is for Port 53 UDP for DNS request and when there is an incoming packet from the user system the packet capture will not show any gateway ID because as per the architecture when the packet sent out from the WAN IP/Interface the Gateway ID will mark. You can see that the forwarded packet has gateway ID marked. This is the behavior of the Cyberoam OS.

Children
No Data