This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

net to net with psk

i wanted to setup a net to net vpn with psk
i downloaded the manual but on the first page there is something what i dont understand. if you look at the figure on top of the page you have 3 ips
192.168.0.2/24 
10.0.2.1====10.0.2.2
192.168.10.2/24

then i go further reading the manual i see in figure 1 adding definitions remote network 10.0.1.0/32
where did this ip came from  [:S]
has anybody some more information about this.

im a beginner to ipsec.

  


This thread was automatically locked due to age.
  • you have two types of ipsec connection. standard and roadwarrior. what are the differences. which one is the best option.  
  • You are normaly using 'standard' when the endpoints have static ip's (=>never changing public IP's) and often subnets are routed through this tunnel.

    Roadwarrior configuration ist mostly used when you just need a vpn connection for a single client (Host) and/or the client has different public IP's because dial in is done temporarly by using more than just one ISP. (different public IP's)