OK I am trying to get the following working.
I have 3 Ethernet cards. One is external two are to internal LAN’s.
First internal (192.168.2.0) is simple going to a gig switch with most or my devices attached.
Second internal is the tricky one (192.168.3.0). This is attached to a WRT54G with the firewall disabled and the wan port joined to the LAN ports. This has one laptop attached to it and our IP phone. The IP phone is exposed to the internet via a nat/packet filter rule and is working fine.
The wireless is running with WPA2 security.
What I a want to do is this. Setup the laptop to have full access to the 192.168.2.0 network and access to the internet. Currently I have got it accessing the internet fine but although I can ping devices on the 192.168.2.0 network Microsoft networking is not working for it.
This laptop needs to also be able to have full access to the network if it is connected via the wireless access point but as it will get the same address I think that will work providing I get the first part working.
However I do not want other devices that connect via the wireless to have access to the local network or full access to the internet (will give limited access).
I have given the laptop a static address and created a network object for it with the static address. However I can’t seem to get it to see the 192.168.2.0 network properly. Have tried various packet filter rules but none seem to work.
This thread was automatically locked due to age.
