This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

7.500 > No WebAdmin interface connection

I did an update from the latest 7.4xx to 7.500 via up2date. Worked fine. ASL is running. Everething works including the userportal. So far. But connecting to the webadmin page via https://ip:4444 (witch worked before the update) only results in a blank page (Die Webseite kann nicht angezeigt werden.)

Thanks for your help.


This thread was automatically locked due to age.
  • Just for now the full rule.

    2009:10:15-09:25:04 asg ulogd[3158]: id="2001" severity="info" sys="SecureNet" sub="packetfilter" name="Packet dropped" action="drop" fwrule="60005" seq="0" initf="unknown" outitf="lo" dstmac="00:00:00:00:00:00" srcmac="00:00:00:00:00:00" srcip="192.168.10.248" dstip="192.168.10.248" proto="6" length="60" tos="0x00" prec="0x00" ttl="64" srcport="54716" dstport="443" tcpflags="SYN"

    The proxy is in Basic User Authentication Mode as i have machines which are member and machines which cannot join the domain due to OS restrictions.
  • My guess is that you don't have your browser configured to 'Bypass proxy server for local addresses' and that this is a rejected attempt to connect to the User Portal.

    If you do have that box checked, and rebooting your PC doesn't solve the problem then I wonder if this isn't a Windows bug.  When you do a route print from the command line in your PC, do you see a missing or incorrect route?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • You are right,Settings the correct sites to skip the proxy fixed this small minor issue [[:)]]
    It is so simple if you think normal [[:)]]

    Sorry for this stupid mistake and it took so long for me and all others to get to this simple solution

    Time to go back to basic InterNetworking school [:(]

    Many thanks for your help.

    regards

    Eddy
  • Eddy, I'm happy if I only make one easy mistake per week!

    That's usually what happens with a thorny problem.  At the end, the answer is simple and you find out you were asking the wrong question.

    Which reminds me of one of my favorite sayings: "Why is it that you always find something in the last place you look for it?"

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • Hello

    i have the same problem, but your proposal didn´t work in my case.
    We run it in the Operation mode: AD SSO.
    We didn´t change anything on the settings from the IE, before the update it worked with the same settings.

    best regards
    Steven
  • Dann wäre's vielleicht nicht das gleiche Problem [;)]

    There are three log files where you might see the block reported: Intrusion Protection, Packet Filter, Content Filter (HTTP).  Please post the relevant line you find.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA