Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 16 replies
  • Subscribers 7 subscribers
  • Views 4430 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Firmware Question

Perry Pong

Hi all,

At Management|Up2date, it shows "Current firmware version: 9.311-3. Your firmware is up to date."

When I go to "ftp://ftp.astaro.com/pub/UTM/v9/up2date/", I see a "u2d-sys-9.600005-601005.tgz.gpg" file. 

I have already clicked the "Check for Up2Date packages now" button and upload the "u2d-sys-9.600005-601005.tgz.gpg" file manually , but the version hasn't changed.

Doesn't my firewall's firmware is really up to date?



This thread was automatically locked due to age.
  • 0 in reply to Perry Pong

    Not enough space.... probably one of the partitions of your drive is (about) full preventing installation.

    In shell you can give the df command to see how much diskfree space there is on every partition. Please list that here.

  • 0 in reply to apijnappels

    Hi apijnappels ,

    Following is the data:


    Filesystem 1K-blocks Used Available Use% Mounted on
    /dev/sda6 5412452 3107240 2007232 61% /
    udev 6101652 120 6101532 1% /dev
    tmpfs 6101652 0 6101652 0% /dev/shm
    /dev/sda1 338875 15621 301238 5% /boot
    /dev/sda5 64464524 12175444 48827348 20% /var/storage
    /dev/sda7 84496620 3424072 76542272 5% /var/log
    /dev/sda8 3650608 8364 3437088 1% /tmp
    tmpfs 6101652 0 6101652 0% /var/sec/chroot-httpd/dev/shm
    tmpfs 6101652 0 6101652 0% /var/storage/chroot-reverseproxy/dev/shm
    tmpfs 6101652 64 6101588 1% /var/storage/chroot-smtp/tmp/ram
    tmpfs 6101652 0 6101652 0% /var/storage/chroot-http/tmp

  • 0 in reply to Perry Pong

    Could you give the following command please, it will give the exact information on the mountpoint and it's free space from the /var/up2date/sys-install folder:

     

    df -h -P /var/up2date/sys-install/

     

  • 0 in reply to Perry Pong

    What also may help is to stop automatic downloading of firmware files, clean folder again and then manually download a couple of update files (of course going from your current fw to the next, and the next and the next) from ftp-site and apply those. That way not all space for all update files is being used and only a couple of these are there. Because you only have a small amount of space too less, that might just do the trick.

    So manually download and apply 3 or 4 updates and then have the UTM check for updates again by itself where it will then find the remaining updatefiles. With a little luck that will leave enough space to get the rest going in one go using webadmin.

    Otherwise you need to find out how to free up space from your partition or start over from scratch (do not forget to first make a backup that can be read back after reapplying a new install from ISO).

    If you start over from ISO you will loose a lot (if not all) logs.

  • 0 in reply to apijnappels

    Oh!!! apijnappels ,

    I want to share my happy for you. I install firmware one by one and make the firewall up to date now! I return from hell! YEAH!!!

  • 0 in reply to apijnappels

    Oh no! But the google drive low download speed still keeps in here!

    so sad! (T_T)