Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Replies 23 replies
  • Subscribers 0 subscribers
  • Views 13443 views
  • Users 0 members are here
Options
Suggested

[9.265-8]Dhclient6 has died

scorpionking
Since using the Beta I get lots of these Messages in the IPv6 log.

2014:10:20-20:25:32 vpn-1 ipv6_watchdog[17175]: Interface ppp0 (24) changed RA flags: NONE -> SENT,RCVD,OTHER,READY
2014:10:20-20:25:32 vpn-1 ipv6_watchdog[17175]: Interface ppp0 (24) changed type to SLAAC
2014:10:20-20:25:32 vpn-1 ipv6_watchdog[17175]: JSON "ppp0", "unknown", "up", { "gateway6": "fe80::230:88ff:fe04:c66", "network6":"1"}
2014:10:20-20:25:32 vpn-1 ipv6_watchdog[17175]: JSON "ppp0", "unknown", "up", { "address6": "2003:6c:***x:***x:***x:***x:***x:***x", "netmask6": "64", "network6":"1" }
2014:10:20-20:25:33 vpn-1 ipv6_watchdog[17175]: Dhclient6 has died


IPv6 prefix is not assigned and Clients do not have access to the internet via IPv6.

Provider: Deutsche Telekom (Germany), Dual stack IPv4/IPv6.
New IPv6 IP and prefix is assigned at every reconnect by this provider.

Any hints to track this down?

edit: Problem still exists with 9.280-3, see page 2 of this thread.
  • 0
    To add some information here:
    I worked with Sophos support on this.
    There are two bugs:
    - Prefix is not updated on reconnect
    - dhclient dies.

    I guess both will be addressed with this mantis.

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
  • 0 in reply to scorpionking
    The prefix is not updated because dhclient6 dies because there is no dhclient6.conf written for PPPoE so it fails to start at all.
  • 0
    Support created a config file by hand. Still the prefix is not being updated although dhclient isn't dying any more...
    They're investigating this issue now...

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
  • 0
    I can confirm: All my IPv6 problems seem to be fixed with 9.280-3.

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
  • 0
    After reinstalling my UTM with 9.280-3 the problem appears again.

    2014:11:09-16:59:08 vpn-1 ipv6_watchdog[4651]: Start of monitoring interface ppp0 (15)
    2014:11:09-16:59:08 vpn-1 ipv6_watchdog[4651]: Installing default route via fe80::230:88ff:fe04:c66 (15)
    2014:11:09-16:59:08 vpn-1 ipv6_watchdog[4651]: Installing address 2003:6c:cf7f:9c25:7015:e7c5:885:2a00/64 (15)
    2014:11:09-16:59:08 vpn-1 ipv6_watchdog[4651]: Interface ppp0 (15) changed RA flags: NONE -> SENT,RCVD,OTHER,READY
    2014:11:09-16:59:08 vpn-1 ipv6_watchdog[4651]: Interface ppp0 (15) changed type to SLAAC
    2014:11:09-16:59:08 vpn-1 ipv6_watchdog[4651]: JSON "ppp0", "unknown", "up", { "gateway6": "fe80::230:88ff:fe04:c66", "network6":"1"}
    2014:11:09-16:59:08 vpn-1 ipv6_watchdog[4651]: JSON "ppp0", "unknown", "up", { "address6": "2003:6c:****:****:****:****:****:2a00", "netmask6": "64", "network6":"1" }
    2014:11:09-16:59:09 vpn-1 ipv6_watchdog[4651]: Dhclient6 has died
    2014:11:09-16:59:55 vpn-1 ipv6_watchdog[4651]: Interface ppp0 (15) changed RA flags: NONE -> SENT,RCVD,OTHER,READY
    2014:11:09-16:59:55 vpn-1 ipv6_watchdog[4651]: Interface ppp0 (15) changed type to SLAAC
    2014:11:09-16:59:55 vpn-1 ipv6_watchdog[4651]: JSON "ppp0", "unknown", "up", { "gateway6": "fe80::230:88ff:fe04:c66", "network6":"1"}
    2014:11:09-16:59:55 vpn-1 ipv6_watchdog[4651]: JSON "ppp0", "unknown", "up", { "address6": "2003:6c:****:****:****:****:****:2a00", "netmask6": "64", "network6":"1" }
    2014:11:09-16:59:56 vpn-1 ipv6_watchdog[4651]: Dhclient6 has died

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
  • 0
    Not all changes that were necessary have made it into 9.280, therefore my problem persists.
    I was promised by Sophos support that the fix will be in 9.301...

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Unfiltered HTML