Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 11 replies
  • Subscribers 27 subscribers
  • Views 19938 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Why does this work or not work?

rfcat_vk

Recently I posted questions similar to these, but the post just vanished. Issue at my end.

So, here goes again

setup 2 vlans similar to my UTM.

1/. traffic from the VoIP phones on vlan 1.2 connect using host vlan 1.2

2/. traffic from PCs through two firewall rules using vlan 1.10 do not work when host selected is vlan 1.10 but work when any host is selected.

3/. I have a device providing secure tunnels to work on vlan 1.10 and the host network chosen is vlan 1.10 with a match a specific host.



This thread was automatically locked due to age.
  • 0 in reply to GabrieleD

    Tried a different dual nic, but one channel failed.

    I do note that the devices keep getting different IP addresses which do not show in the connection report.

    At this stage VLANs on my XG are a total failure, so back to one lan until v17 and try again.

    So in summary the XG is not as secure as the UTM

    1/, no ntp proxy

    2/. no DNS proxy

    3/. vlan connections left open after the device is disconnected.

    4/. IP addresses keep changing even when setup in the DHCP server, so it is difficult to keep track of what is actually using what rule.