Dell PowerEdge R220 - Sophos XG Home v18

Hi Tim,

I've been looking at the i3-9100T too

The R220 I've been looking at is specifically the 25W TDP CPU version 

https://www.bargainhardware.co.uk/dell-r220-1u-2-lff-nhs-sata-nhsp-configure-to-order

This is the machine in the outlet store I am considering

https://outlet.euro.dell.com/Online/SecondaryInventorySearch.aspx?c=uk&cs=ukdfb1&l=en&s=dfb&sign=PXhcOSHtr1T4IOw%2fPR7UdRz8nSDgISaZpb5lbGXc%2fJuz0H5KB8O0qXxfAI8N3DcBg7x9q28IpsAfyOeg7zXg9gSAOKzEG%2f1ocHerl5SN0ZNbY9hfcNxWqPMt6W4AEF6zMJ%2f0ziWjk60UQF56CAmJ2UsPziU7jy%2b9Vd5HnRaDy%2bGDCDivUALc1VaokdhjbmZ%2bXZfaGEWIBZ6aI2K43BIyKOFKGUozUafK0ykge33vJvM%3d

Yes those costs can run away very quickly, I have an older i7 PC with Nvidia 1660 graphics card installed, it munches electricity when it's being pushed.

I've been removing a pond from our garden as fed up with the running costs.  Pump 130W, 55W UV, air pump 30W I think all 24/7 - adds up.  I think last year with water, electric and other stuff the pond costs £500-700.  Had enough of that!

Servers just eat power, it's not just the CPU it's all the other components that servers have which desktop machines don't.

At the DR site, for example, this is the graph taken from iLO for a machine which is sitting idle - it's an old DL380p Gen 8 with a single E5-2630 V1 CPUs, part of a cluster array and only designed to host the critical production virtual machines.

Considering it's sitting there doing nothing, and the CPUs only use the power that they need - it's quite power hungry.

For those with VDSL / ADSL connections - I often had wondered how something like this would work with the Sophos XG.

https://www.draytek.co.uk/products/business/vigornic-132

Install this into a PC, and then use the onboard network port for LAN.

Hi Tim,

Indeed, all the other components add up to the consumption.  the HP DL380 range have always been pretty power hungry.  I've worked in the past with the DL580 servers and the power on those is just crazy.

I've seen a couple of Dell docs that imply the Dell R220 would draw circa 50W in consumption, so pretty good.  Keep meaning to order a power reader from Wickes to see what draw devices have.  Might see if my neighbor has one as he's in the building trade.  

Will do some further reading and digging.

Hi foks,

as far as I can tell you are basing your power consumption on devices that run MS applications and my experience with them compared to UTM and XG firewalls shows they run less.

As I have indicate previously my current XG uses about 20-25w 24/7. It is based on a server motherboard.

Actual power consumption calculations 

1/. I have solar panels installed so let use assume no grid consumption for 7 hors a day worst case.

2/. 0.025*17*365*0.24= $37.00 approx a year.

Ian

Interestingly the DL360p used more power out the box than the DL380p - we put that down to the fact that the fans have to spin faster to move the same volume of air through, plus they seem to work harder as I guess with smaller heat-sinks you need more air.

I expect you're right, ramping up of the fans as it does POST.

I've been working more and more with Dell PowerEdge recently and starting to prefer it from certain aspects.  HPE have lost their way with some of the kit imho.

I'll be ordering up the Dell R220 today, what's the worst that can happen, it gets sold on :) 

Good luck with the R220 - be interesting to see the results you get.

I agree re HP - it was when they started charging for BIOS updates, where you needed a support pack at huge cost to be able to download them, that a lot of my customers switched to Dell.

HP shot themselves in the foot over that one - after all, who really wants to pay for fixes to a system that you have already paid for...