Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 22 replies
  • Subscribers 28 subscribers
  • Views 3496 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

New User Urgent Help With Zone To Zone Required Please

Martyn Campbell

Hi,

 

I have just installed this morning coming from pfSense and have connected to the internet but require my LAN & WiFi Ports to see each other.

 

I have configured the zone to zone firewall rule to any from any but it is not working?

 

Wife & Kids are going mad as we are in lockdown :-(

 

Massive thanks to any help in advance!

 



This thread was automatically locked due to age.
  • 0 in reply to Martyn Campbell

    Ok this sounds wired. 

     

    Are you using the same default GW on all the interfaces that the PFsence did have?

    And you should really try out the Policy tester to see what is blocking the traffic. Open the logging window, and on the upper right side klick the "Policy tester" and run a test from there to see if you hit the right firewall rule.

     

    Usualy this is "just working".

     

    //Rickard

  • 0 in reply to RickardNordahl

    Hi!

    Thanks for your reply!

    I have spent some time on this today and  spent ages with me and resolved/tidied up my installation,got my nextcloud working locally, generally a massive help!

    He cut down my rules list and today I removed Port 4 so I now have

    Port1 LAN - 192.168.0.*

    Port2 WAN

    Port3 LAN - 192.168.1.*

     

    Whilst this is now mostly working I have some IP's on Port3 that I cannot access from Port1 If I can see how to fix one, I should be fine to fix the rest so here is one example

    my unraid server has 3 connections (not that I think this is important)

    eth0 LAN - 192.168.0.33

    eth1 LAN - 192.168.1.33

    eth2 LAN (10Gbe) - 192.168.11.33

    There is a docker running 0n eth1 with an address of 192.168.1.38, I can access the web-ui from a device connected on Port3 but not from Port1 even though the firewall says it is allowed from Port1