Linux version 2.6.32.24-79.g7e18979-ai (abuild@sles11) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP Fri Dec 3 13:52:07 UTC 2010
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000005f7f0000 (usable)
 BIOS-e820: 000000005f7f0000 - 000000005f7f3000 (ACPI NVS)
 BIOS-e820: 000000005f7f3000 - 000000005f800000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI 2.2 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x5f7f0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CAFFF write-protect
  CB000-EFFFF uncachable
  F0000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 000000000 mask FC0000000 write-back
  1 base 040000000 mask FE0000000 write-back
  2 base 05F800000 mask FFF800000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000377fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037400000 page 2M
 0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 10000-15000
RAMDISK: 5e86b000 - 5f7cea42
Allocated new RAMDISK: 0135d000 - 022c0a42
Move RAMDISK from 000000005e86b000 - 000000005f7cea41 to 0135d000 - 022c0a41
ACPI: RSDP 000f6010 00014 (v00 IntelR)
ACPI: RSDT 5f7f3040 0002C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 5f7f30c0 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 5f7f3180 03925 (v01 INTELR AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 5f7f0000 00040
ACPI: APIC 5f7f6b00 00068 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
639MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
  node 0 low ram: 00000000 - 377fe000
  node 0 bootmap 00011000 - 00017f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0001000000 - 0001355694]    TEXT DATA BSS ==> [0001000000 - 0001355694]
  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #5 [0001356000 - 000135c072]              BRK ==> [0001356000 - 000135c072]
  #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
  #7 [000135d000 - 00022c0a42]      NEW RAMDISK ==> [000135d000 - 00022c0a42]
  #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
found SMP MP-table at [c00f47d0] f47d0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x0005f7f0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0005f7f0
On node 0 totalpages: 391039
free_area_init_node: node 0, pgdat c12c9820, node_mem_map c22c2200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 1280 pages used for memmap
  HighMem zone: 162546 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 24
Allocating PCI resources starting at 5f800000 (gap: 5f800000:9f400000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 11 pages/cpu @c3000000 s21112 r0 d23944 u2097152
pcpu-alloc: s21112 r0 d23944 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 387983
Kernel command line: vga=normal initrd=initramfs.gz load_ramdisk=1 root=/dev/ram quiet log_buf_len=256k BOOT_IMAGE=bzimage 
log_buf_len: 262144
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:0005f7f0)
Memory: 1530556k/1564608k available (1944k kernel code, 32604k reserved, 922k data, 316k init, 655304k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff1f000 - 0xfffff000   ( 896 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc12cd000 - 0xc131c000   ( 316 kB)
      .data : 0xc11e60f4 - 0xc12cca88   ( 922 kB)
      .text : 0xc1000000 - 0xc11e60f4   (1944 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:512
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2791.191 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5582.38 BogoMIPS (lpj=2791191)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 18k freed
ACPI: Core revision 20090903
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
Brought up 1 CPUs
Total of 1 processors activated (5582.38 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb270, last bus=3
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe8000000-0xebffffff]
pci 0000:00:02.0: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff]
pci 0000:00:02.0: reg 14 32bit mmio: [0xec300000-0xec37ffff]
pci 0000:00:1d.0: reg 20 io port: [0xe100-0xe11f]
pci 0000:00:1d.1: reg 20 io port: [0xe000-0xe01f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xec380000-0xec3803ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this clock source is slow. If you are sure your timer does not have
* this bug, please use "acpi_pm_good" to disable the workaround
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0xf000-0xf00f]
pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
pci 0000:01:07.0: supports D1 D2
pci 0000:01:0a.0: reg 10 32bit mmio: [0xec100000-0xec11ffff]
pci 0000:01:0a.0: reg 14 32bit mmio: [0xec120000-0xec13ffff]
pci 0000:01:0a.0: reg 18 io port: [0xd000-0xd03f]
pci 0000:01:0a.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:01:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:01:0a.0: PME# disabled
pci 0000:01:0b.0: reg 10 32bit mmio: [0xec140000-0xec15ffff]
pci 0000:01:0b.0: reg 14 32bit mmio: [0xec160000-0xec17ffff]
pci 0000:01:0b.0: reg 18 io port: [0xd100-0xd13f]
pci 0000:01:0b.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:01:0b.0: PME# supported from D0 D3hot D3cold
pci 0000:01:0b.0: PME# disabled
pci 0000:01:0c.0: reg 10 32bit mmio: [0xec180000-0xec19ffff]
pci 0000:01:0c.0: reg 14 32bit mmio: [0xec1a0000-0xec1bffff]
pci 0000:01:0c.0: reg 18 io port: [0xd200-0xd23f]
pci 0000:01:0c.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:01:0c.0: PME# supported from D0 D3hot D3cold
pci 0000:01:0c.0: PME# disabled
pci 0000:01:0d.0: reg 10 32bit mmio: [0xec1c0000-0xec1dffff]
pci 0000:01:0d.0: reg 14 32bit mmio: [0xec1e0000-0xec1fffff]
pci 0000:01:0d.0: reg 18 io port: [0xd300-0xd33f]
pci 0000:01:0d.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:01:0d.0: PME# supported from D0 D3hot D3cold
pci 0000:01:0d.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xc000-0xdfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xec000000-0xec2fffff]
pci 0000:03:08.0: reg 10 32bit mmio: [0xec092000-0xec092fff]
pci 0000:03:08.0: reg 14 io port: [0xc000-0xc03f]
pci 0000:03:08.0: reg 18 32bit mmio: [0xec000000-0xec01ffff]
pci 0000:03:08.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
pci 0000:03:08.0: supports D1 D2
pci 0000:03:08.0: PME# supported from D0 D1 D2 D3hot
pci 0000:03:08.0: PME# disabled
pci 0000:03:09.0: reg 10 32bit mmio: [0xec090000-0xec090fff]
pci 0000:03:09.0: reg 14 io port: [0xc100-0xc13f]
pci 0000:03:09.0: reg 18 32bit mmio: [0xec020000-0xec03ffff]
pci 0000:03:09.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
pci 0000:03:09.0: supports D1 D2
pci 0000:03:09.0: PME# supported from D0 D1 D2 D3hot
pci 0000:03:09.0: PME# disabled
pci 0000:03:0a.0: reg 10 32bit mmio: [0xec093000-0xec093fff]
pci 0000:03:0a.0: reg 14 io port: [0xc200-0xc23f]
pci 0000:03:0a.0: reg 18 32bit mmio: [0xec040000-0xec05ffff]
pci 0000:03:0a.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
pci 0000:03:0a.0: supports D1 D2
pci 0000:03:0a.0: PME# supported from D0 D1 D2 D3hot
pci 0000:03:0a.0: PME# disabled
pci 0000:03:0b.0: reg 10 32bit mmio: [0xec091000-0xec091fff]
pci 0000:03:0b.0: reg 14 io port: [0xc300-0xc33f]
pci 0000:03:0b.0: reg 18 32bit mmio: [0xec060000-0xec07ffff]
pci 0000:03:0b.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
pci 0000:03:0b.0: supports D1 D2
pci 0000:03:0b.0: PME# supported from D0 D1 D2 D3hot
pci 0000:03:0b.0: PME# disabled
pci 0000:01:09.0: bridge io port: [0xc000-0xcfff]
pci 0000:01:09.0: bridge 32bit mmio: [0xec000000-0xec0fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0xb78-0xb7b has been reserved
system 00:01: ioport range 0xf78-0xf7b has been reserved
system 00:01: ioport range 0xa78-0xa7b has been reserved
system 00:01: ioport range 0xe78-0xe7b has been reserved
system 00:01: ioport range 0xbbc-0xbbf has been reserved
system 00:01: ioport range 0xfbc-0xfbf has been reserved
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x294-0x297 has been reserved
system 00:0a: ioport range 0x400-0x4bf could not be reserved
system 00:0c: iomem range 0xf0000-0xf3fff could not be reserved
system 00:0c: iomem range 0xf4000-0xf7fff could not be reserved
system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
system 00:0c: iomem range 0x5f7f0000-0x5f7fffff could not be reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0x100000-0x5f7effff could not be reserved
system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0c: iomem range 0xffb00000-0xffb7ffff has been reserved
system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
system 00:0c: iomem range 0xe0000-0xeffff has been reserved
pci 0000:01:07.0: PCI bridge, secondary bus 0000:02
pci 0000:01:07.0:   IO window: disabled
pci 0000:01:07.0:   MEM window: disabled
pci 0000:01:07.0:   PREFETCH window: disabled
pci 0000:01:09.0: PCI bridge, secondary bus 0000:03
pci 0000:01:09.0:   IO window: 0xc000-0xcfff
pci 0000:01:09.0:   MEM window: 0xec000000-0xec0fffff
pci 0000:01:09.0:   PREFETCH window: 0x60000000-0x600fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1e.0:   IO window: 0xc000-0xdfff
pci 0000:00:1e.0:   MEM window: 0xec000000-0xec2fffff
pci 0000:00:1e.0:   PREFETCH window: 0x60000000-0x601fffff
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io:  [0xc000-0xdfff]
pci_bus 0000:01: resource 1 mem: [0xec000000-0xec2fffff]
pci_bus 0000:01: resource 2 pref mem [0x60000000-0x601fffff]
pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:03: resource 0 io:  [0xc000-0xcfff]
pci_bus 0000:03: resource 1 mem: [0xec000000-0xec0fffff]
pci_bus 0000:03: resource 2 pref mem [0x60000000-0x600fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
pci 0000:03:08.0: Firmware left e100 interrupts enabled; disabling
pci 0000:03:09.0: Firmware left e100 interrupts enabled; disabling
pci 0000:03:0a.0: Firmware left e100 interrupts enabled; disabling
pci 0000:03:0b.0: Firmware left e100 interrupts enabled; disabling
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15758k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1308947196.707:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
msgmni has been set to 1742
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler cfq registered (default)
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 830M Chipset
agpgart-intel 0000:00:00.0: detected 8060K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input0
EDAC MC: Ver: 2.1.0 Dec  3 2010
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Using IPI Shortcut mode
Freeing unused kernel memory: 316k freed
udevd version 128 started
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e100
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32.24-79.g7e18979-ai uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32.24-79.g7e18979-ai uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xec380000
SCSI subsystem initialized
Intel(R) PRO/1000 Network Driver - version 8.0.23-NAPI
Copyright (c) 1999-2010 Intel Corporation.
e1000 0000:01:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
intel_rng: FWH not detected
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:03:08.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
e100 0000:03:08.0: PME# disabled
e100: eth0: e100_probe: addr 0xec092000, irq 19, MAC addr 00:1a:8c:15:b2:d4
e100 0000:03:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e100 0000:03:09.0: PME# disabled
e100: eth1: e100_probe: addr 0xec090000, irq 16, MAC addr 00:1a:8c:15:b2:d5
e100 0000:03:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
e100 0000:03:0a.0: PME# disabled
e100: eth2: e100_probe: addr 0xec093000, irq 17, MAC addr 00:1a:8c:15:b2:d6
e100 0000:03:0b.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
e100 0000:03:0b.0: PME# disabled
e100: eth3: e100_probe: addr 0xec091000, irq 18, MAC addr 00:1a:8c:15:b2:d7
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram
e1000: 0000:01:0a.0: e1000_probe: (PCI:33MHz:32-bit) 00:1a:8c:15:b2:d0
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32.24-79.g7e18979-ai ehci_hcd
usb usb3: SerialNumber: 0000:00:1d.7
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
usb 3-4: new high speed USB device using ehci_hcd and address 3
ata1.00: ATA-7: ST380215A, 3.AAD, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48 
usb 3-4: New USB device found, idVendor=0409, idProduct=0056
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-4: Product: USB Mass Storage Device
usb 3-4: Manufacturer: TSST corp
usb 3-4: SerialNumber: 000000000001
usb 3-4: configuration #1 chosen from 1 choice
ppdev: user-space parallel port driver
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      ST380215A        3.AA PQ: 0 ANSI: 5
usb 1-2: new low speed USB device using uhci_hcd and address 2
Initializing USB Mass Storage driver...
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
 sda1 sda2 sda3 sda4 <
usb 1-2: New USB device found, idVendor=046d, idProduct=c31c
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: USB Keyboard
usb 1-2: Manufacturer: Logitech
usb 1-2: configuration #1 chosen from 1 choice
 sda5 sda6
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input1
generic-usb 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.0-2/input0
 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/input/input2
generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.0-2/input1
e1000: eth4: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000 0000:01:0b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
e1000: 0000:01:0b.0: e1000_probe: (PCI:33MHz:32-bit) 00:1a:8c:15:b2:d1
e1000: eth5: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000 0000:01:0c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000: 0000:01:0c.0: e1000_probe: (PCI:33MHz:32-bit) 00:1a:8c:15:b2:d2
e1000: eth6: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000 0000:01:0d.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
e1000: 0000:01:0d.0: e1000_probe: (PCI:33MHz:32-bit) 00:1a:8c:15:b2:d3
e1000: eth7: e1000_probe: Intel(R) PRO/1000 Network Connection
IPv4 FIB: Using LC-trie version 0.409
usb-storage: device scan complete
scsi 2:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S182M SB03 PQ: 0 ANSI: 0
scsi 2:0:0:0: Attached scsi generic sg1 type 5
sr0: scsi3-mmc drive: 8x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
ide-cd driver 5.00
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
e100 0000:03:08.0: firmware: requesting e100/d102e_ucode.bin
e100 0000:03:09.0: firmware: requesting e100/d102e_ucode.bin
e100 0000:03:0a.0: firmware: requesting e100/d102e_ucode.bin
e100 0000:03:0b.0: firmware: requesting e100/d102e_ucode.bin
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
usb 3-1: new high speed USB device using ehci_hcd and address 4
usb 3-1: New USB device found, idVendor=154b, idProduct=0110
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: USB 2.0 FD      
usb 3-1: Manufacturer: PNY     
usb 3-1: SerialNumber: 6E5812001CCA
usb 3-1: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 3:0:0:0: Direct-Access     PNY      USB 2.0 FD       PMAP PQ: 0 ANSI: 0 CCS
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdb] 985088 512-byte logical blocks: (504 MB/481 MiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] Attached SCSI removable disk
