00:00.0 0600: 8086:2560 (rev 03)
	Subsystem: 8086:2560
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [e4] Vendor Specific Information <?>
	Kernel driver in use: agpgart-intel
00: 86 80 60 25 06 00 90 20 03 00 00 06 00 00 00 00
10: 08 00 00 e8 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 60 25
30: 00 00 00 00 e4 00 00 00 00 00 00 00 00 00 00 00

00:02.0 0300: 8086:2562 (rev 03) (prog-if 00 [VGA controller])
	Subsystem: 8086:2562
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
	Region 1: Memory at ec300000 (32-bit, non-prefetchable) [size=512K]
	Capabilities: [d0] Power Management version 1
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 86 80 62 25 07 00 90 00 03 00 00 03 00 00 00 00
10: 08 00 00 e0 00 00 30 ec 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 62 25
30: 00 00 00 00 d0 00 00 00 00 00 00 00 0a 01 00 00

00:1d.0 0c03: 8086:24c2 (rev 02) (prog-if 00 [UHCI])
	Subsystem: 8086:24c2
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 10
	Region 4: I/O ports at e100 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd
00: 86 80 c2 24 05 00 80 02 02 00 03 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e1 00 00 00 00 00 00 00 00 00 00 86 80 c2 24
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00

00:1d.1 0c03: 8086:24c4 (rev 02) (prog-if 00 [UHCI])
	Subsystem: 8086:24c2
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 12
	Region 4: I/O ports at e000 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd
00: 86 80 c4 24 05 00 80 02 02 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e0 00 00 00 00 00 00 00 00 00 00 86 80 c2 24
30: 00 00 00 00 00 00 00 00 00 00 00 00 0c 02 00 00

00:1d.7 0c03: 8086:24cd (rev 02) (prog-if 20 [EHCI])
	Subsystem: 8086:24cd
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 9
	Region 0: Memory at ec380000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd
00: 86 80 cd 24 06 00 90 02 02 20 03 0c 00 00 00 00
10: 00 00 38 ec 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 cd 24
30: 00 00 00 00 50 00 00 00 00 00 00 00 09 04 00 00

00:1e.0 0604: 8086:244e (rev 82) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=03, sec-latency=32
	I/O behind bridge: 0000c000-0000dfff
	Memory behind bridge: ec000000-ec2fffff
	Prefetchable memory behind bridge: 20000000-201fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00: 86 80 4e 24 07 01 80 80 82 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 03 20 c0 d0 80 02
20: 00 ec 20 ec 00 20 10 20 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00

00:1f.0 0601: 8086:24c0 (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Kernel modules: intel-rng
00: 86 80 c0 24 0f 00 80 02 02 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:1f.1 0101: 8086:24cb (rev 02) (prog-if 8a [Master SecP PriP])
	Subsystem: 8086:24c2
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 5
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at f000 [size=16]
	Region 5: Memory at 20200000 (32-bit, non-prefetchable) [size=1K]
	Kernel driver in use: ata_piix
	Kernel modules: piix, ata_piix
00: 86 80 cb 24 07 00 80 02 02 8a 01 01 00 00 00 00
10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
20: 01 f0 00 00 00 00 20 20 00 00 00 00 86 80 c2 24
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00

00:1f.3 0c05: 8086:24c3 (rev 02)
	Subsystem: 8086:24c2
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 11
	Region 4: I/O ports at 0500 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c-i801
00: 86 80 c3 24 01 00 80 02 02 00 05 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 05 00 00 00 00 00 00 00 00 00 00 86 80 c2 24
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00

01:07.0 0604: 12d8:8152 (rev 01) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 32 bytes
	Bus: primary=01, secondary=02, subordinate=02, sec-latency=32
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: d8 12 52 81 07 01 b0 02 01 00 04 06 08 20 01 00
10: 00 00 00 00 00 00 00 00 01 02 02 20 f1 01 a0 22
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 00 02 00

01:09.0 0604: 12d8:8150 (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32, Cache Line Size: 32 bytes
	Bus: primary=01, secondary=03, subordinate=03, sec-latency=32
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: ec000000-ec0fffff
	Prefetchable memory behind bridge: 0000000020000000-00000000200fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [b0] Slot ID: 0 slots, First-, chassis 00
00: d8 12 50 81 07 01 90 02 02 00 04 06 08 20 01 00
10: 00 00 00 00 00 00 00 00 01 03 03 20 c1 c1 80 02
20: 00 ec 00 ec 01 20 01 20 00 00 00 00 00 00 00 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 00 02 00

01:0a.0 0200: 8086:1076 (rev 05)
	Subsystem: 8086:1076
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (63750ns min), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at ec100000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at ec120000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at d000 [size=64]
	[virtual] Expansion ROM at 20100000 [disabled] [size=128K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [e4] PCI-X non-bridge device
		Command: DPERE- ERO+ RBC=512 OST=1
		Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
	Kernel driver in use: e1000
	Kernel modules: e1000
00: 86 80 76 10 07 00 30 02 05 00 00 02 08 20 00 00
10: 00 00 10 ec 00 00 12 ec 01 d0 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 76 10
30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 ff 00

01:0b.0 0200: 8086:1076 (rev 05)
	Subsystem: 8086:1076
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (63750ns min), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at ec140000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at ec160000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at d100 [size=64]
	[virtual] Expansion ROM at 20120000 [disabled] [size=128K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [e4] PCI-X non-bridge device
		Command: DPERE- ERO+ RBC=512 OST=1
		Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
	Kernel driver in use: e1000
	Kernel modules: e1000
00: 86 80 76 10 07 00 30 02 05 00 00 02 08 20 00 00
10: 00 00 14 ec 00 00 16 ec 01 d1 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 76 10
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 ff 00

01:0c.0 0200: 8086:1076 (rev 05)
	Subsystem: 8086:1076
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (63750ns min), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at ec180000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at ec1a0000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at d200 [size=64]
	[virtual] Expansion ROM at 20140000 [disabled] [size=128K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [e4] PCI-X non-bridge device
		Command: DPERE- ERO+ RBC=512 OST=1
		Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
	Kernel driver in use: e1000
	Kernel modules: e1000
00: 86 80 76 10 07 00 30 02 05 00 00 02 08 20 00 00
10: 00 00 18 ec 00 00 1a ec 01 d2 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 76 10
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0a 01 ff 00

01:0d.0 0200: 8086:1076 (rev 05)
	Subsystem: 8086:1076
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (63750ns min), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 12
	Region 0: Memory at ec1c0000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at ec1e0000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at d300 [size=64]
	[virtual] Expansion ROM at 20160000 [disabled] [size=128K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [e4] PCI-X non-bridge device
		Command: DPERE- ERO+ RBC=512 OST=1
		Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
	Kernel driver in use: e1000
	Kernel modules: e1000
00: 86 80 76 10 07 00 30 02 05 00 00 02 08 20 00 00
10: 00 00 1c ec 00 00 1e ec 01 d3 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 76 10
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0c 01 ff 00

03:08.0 0200: 8086:1229 (rev 10)
	Subsystem: 8086:0070
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 12
	Region 0: Memory at ec092000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at c000 [size=64]
	Region 2: Memory at ec000000 (32-bit, non-prefetchable) [size=128K]
	[virtual] Expansion ROM at 20000000 [disabled] [size=64K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
	Kernel driver in use: e100
	Kernel modules: e100
00: 86 80 29 12 07 00 90 02 10 00 00 02 08 20 00 00
10: 00 20 09 ec 01 c0 00 00 00 00 00 ec 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 70 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0c 01 08 38

03:09.0 0200: 8086:1229 (rev 10)
	Subsystem: 8086:0070
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at ec090000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at c100 [size=64]
	Region 2: Memory at ec020000 (32-bit, non-prefetchable) [size=128K]
	[virtual] Expansion ROM at 20010000 [disabled] [size=64K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
	Kernel driver in use: e100
	Kernel modules: e100
00: 86 80 29 12 07 00 90 02 10 00 00 02 08 20 00 00
10: 00 00 09 ec 01 c1 00 00 00 00 02 ec 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 70 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0a 01 08 38

03:0a.0 0200: 8086:1229 (rev 10)
	Subsystem: 8086:0070
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at ec093000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at c200 [size=64]
	Region 2: Memory at ec040000 (32-bit, non-prefetchable) [size=128K]
	[virtual] Expansion ROM at 20020000 [disabled] [size=64K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
	Kernel driver in use: e100
	Kernel modules: e100
00: 86 80 29 12 07 00 90 02 10 00 00 02 08 20 00 00
10: 00 30 09 ec 01 c2 00 00 00 00 04 ec 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 70 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 08 38

03:0b.0 0200: 8086:1229 (rev 10)
	Subsystem: 8086:0070
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at ec091000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at c300 [size=64]
	Region 2: Memory at ec060000 (32-bit, non-prefetchable) [size=128K]
	[virtual] Expansion ROM at 20030000 [disabled] [size=64K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
	Kernel driver in use: e100
	Kernel modules: e100
00: 86 80 29 12 07 00 90 02 10 00 00 02 08 20 00 00
10: 00 10 09 ec 01 c3 00 00 00 00 06 ec 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 70 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 08 38

