Linux version 2.6.16.29-24-default (abuild@sles10) (gcc version 4.1.0 (SUSE Linux)) #1 Fri Nov 10 13:19:39 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001eff0000 (usable) BIOS-e820: 000000001eff0000 - 000000001eff3000 (ACPI NVS) BIOS-e820: 000000001eff3000 - 000000001f000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 495MB LOWMEM available. On node 0 totalpages: 126960 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 122864 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 DMI 2.3 present. ACPI: RSDP (v000 P4M80P ) @ 0x000f8f80 ACPI: RSDT (v001 P4M80P AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1eff3040 ACPI: FADT (v001 P4M80P AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1eff30c0 ACPI: DSDT (v001 P4M80P AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x408 Allocating PCI resources starting at 20000000 (gap: 1f000000:e0ff0000) Built 1 zonelists Kernel command line: root=/dev/hda6 vga=791 No local APIC present or hardware disabled mapped APIC to ffffd000 (013e2000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 997.740 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 497536k/507840k available (2040k kernel code, 9708k reserved, 626k data, 172k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1998.88 BogoMIPS (lpj=3997771) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: a7c9b8ff 00000000 00000000 00000000 00000181 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 128K (64 bytes/line) CPU: After all inits, caps: 27c9b8ff 00000000 00000000 00000000 00000181 00003fcc 00000000 CPU: Centaur VIA Esther processor 1000MHz stepping 09 Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 0e20) checking if image is initramfs... it is Freeing initrd memory: 2101k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfa9b0, last bus=2 PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *5 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca) PCI: Bridge: 0000:00:01.0 IO window: b000-bfff MEM window: fb000000-fcffffff PREFETCH window: f4000000-f7ffffff PCI: Bridge: 0000:00:14.0 IO window: a000-afff MEM window: fdc00000-fdefffff PREFETCH window: fdb00000-fdbfffff PCI: Setting latency timer of device 0000:00:01.0 to 64 Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered PCI: Bypassing VIA 8237 APIC De-Assert Message vesafb: framebuffer at 0xf4000000, mapped to 0xdf880000, using 6144k, total 16384k vesafb: mode is 1024x768x16, linelength=2048, pages=9 vesafb: protected mode interface info at c000:a520 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 33572 bytes,<6>...found (1024x768, 21731 bytes, v3). Console: switching to colour frame buffer device 99x46 fb0: VESA VGA frame buffer device vga16fb: initializing vga16fb: mapped to 0xc00a0000 fb1: VGA16 VGA frame buffer device Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM chipsets intelfb: Version 0.9.2 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 11 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:pio, hdd:DMA Probing IDE interface ide0... hda: WDC WD800BB-75CAA0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdd: LTN486S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: Host Protected Area detected. current capacity is 156250000 sectors (80000 MB) native capacity is 156301488 sectors (80026 MB) hda: Host Protected Area disabled. hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes not supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > usbmon: debugfs is not available usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 4, 65536 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered asg_cluster [init]: loaded warp helper with rb size 96 kb (total 8192) TCP bic registered NET: Registered protocol family 1 Using IPI Shortcut mode Freeing unused kernel memory: 172k freed input: AT Translated Set 2 keyboard as /class/input/input1 input: AT Translated Set 2 keyboard as /class/input/input2 SCSI subsystem initialized libata version 1.20 loaded. sata_via 0000:00:0f.0: version 1.1 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 sata_via 0000:00:0f.0: routed to hard irq line 11 ata1: SATA max UDMA/133 cmd 0xFC00 ctl 0xF802 bmdma 0xEC00 irq 11 ata2: SATA max UDMA/133 cmd 0xF400 ctl 0xF002 bmdma 0xEC08 irq 11 ata1: SATA link down (SStatus 0) scsi0 : sata_via ata2: SATA link down (SStatus 0) scsi1 : sata_via kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. loop: loaded (max 8 devices) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. Capability LSM initialized via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 eth0: VIA Rhine II at 0x1cc00, 00:40:63:e8:fd:13, IRQ 11. eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1. e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 e100: eth1: e100_probe: addr 0xfdeff000, irq 11, MAC addr 00:02:A5:F3:5B:A8 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 e100: eth2: e100_probe: addr 0xfdefe000, irq 10, MAC addr 00:02:A5:F3:5B:A9 eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others Adding 1052248k swap on /dev/hda2. Priority:-1 extents:1 across:1052248k IPv4 FIB: Using LC-trie version 0.404 Netfilter messages via NETLINK v0.30. ip_tables: (C) 2000-2006 Netfilter Core Team ip_conntrack version 2.4 (45737 buckets, 365896 max) - 240 bytes per conntrack ipt_LOG: not logging via system console since somebody else already registered for PF_INET ctnetlink v0.90: registering with nfnetlink. eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v2.3 e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex e100: eth2: e100_watchdog: link up, 100Mbps, full-duplex eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 NET: Registered protocol family 17 klips_info:ipsec_init: KLIPS startup, Openswan KLIPS IPsec stack version: 2.4.5 and cluster version: v 1.0 NET: Registered protocol family 15 klips_info:ipsec_alg_init: KLIPS alg v=0.8.1-0 (EALG_MAX=255, AALG_MAX=251) klips_info:ipsec_alg_init: calling ipsec_alg_static_init() ipsec_aes_init(alg_type=15 alg_id=12 name=aes): ret=0 klips_debug: experimental ipsec_alg_AES_MAC not registered [Ok] (auth_id=0) ipsec_3des_init(alg_type=15 alg_id=3 name=3des): ret=0 ipsec_sha2_init(alg_type=14 alg_id=5 name=sha2_256): ret=0 ipsec_sha2_init(alg_type=14 alg_id=7 name=sha2_512): ret=0 KLIPS cryptoapi interface: alg_type=15 alg_id=253 name=twofish keyminbits=128 keymaxbits=256, found(0) KLIPS cryptoapi interface: alg_type=15 alg_id=252 name=tnepres keyminbits=128 keymaxbits=256, found(0) KLIPS cryptoapi interface: alg_type=15 alg_id=6 name=cast5 keyminbits=128 keymaxbits=128, found(0) KLIPS cryptoapi interface: alg_type=15 alg_id=7 name=blowfish keyminbits=96 keymaxbits=448, found(0) KLIPS cryptoapi interface: alg_type=15 alg_id=2 name=des keyminbits=64 keymaxbits=64, found(0) KLIPS cryptoapi interface: alg_type=15 alg_id=11 name=cipher_null keyminbits=0 keymaxbits=0, found(0) CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 eth0: Promiscuous mode enabled. device eth0 entered promiscuous mode device eth0 left promiscuous mode eth0: Promiscuous mode enabled. device eth0 entered promiscuous mode ip_conntrack_pptp version 3.1 loaded Ebtables v2.0 registered MPPE/MPPC encryption/compression module registered PPP BSD Compression module registered PPP Deflate Compression module registered device eth1 entered promiscuous mode ip_nat_pptp version 3.0 loaded device eth1 left promiscuous mode device eth1 entered promiscuous mode device eth1 left promiscuous mode