16: PCI 0f.1: 0101 IDE interface
  [Created at pci.318]
  Unique ID: rKvl.f2sHK1tVWsE
  SysFS ID: /devices/pci0000:00/0000:00:0f.1
  SysFS BusID: 0000:00:0f.1
  Hardware Class: storage
  Model: "Broadcom CSB5 IDE Controller"
  Vendor: pci 0x1166 "Broadcom"
  Device: pci 0x0212 "CSB5 IDE Controller"
  SubVendor: pci 0x1166 "Broadcom"
  SubDevice: pci 0x0212 
  Revision: 0x93
  Driver: "pata_serverworks"
  Driver Modules: "pata_serverworks"
  I/O Ports: 0x1f0-0x1f7 (rw)
  I/O Port: 0x3f6 (rw)
  I/O Ports: 0x170-0x177 (rw)
  I/O Port: 0x376 (rw)
  I/O Ports: 0x1800-0x180f (rw)
  Module Alias: "pci:v00001166d00000212sv00001166sd00000212bc01sc01i8a"
  Driver Info #0:
    Driver Status: pata_serverworks is active
    Driver Activation Cmd: "modprobe pata_serverworks"
  Driver Info #1:
    Driver Status: serverworks is not active
    Driver Activation Cmd: "modprobe serverworks"
  Driver Info #2:
    Driver Status: pata_acpi is active
    Driver Activation Cmd: "modprobe pata_acpi"
  Driver Info #3:
    Driver Status: ata_generic is active
    Driver Activation Cmd: "modprobe ata_generic"
  Driver Info #4:
    Driver Status: ide_pci_generic is active
    Driver Activation Cmd: "modprobe ide_pci_generic"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

22: PCI 20a.0: 0100 SCSI storage controller
  [Created at pci.318]
  Unique ID: y9as.gxXUdpYMP+5
  SysFS ID: /devices/pci0000:02/0000:02:0a.0
  SysFS BusID: 0000:02:0a.0
  Hardware Class: storage
  Model: "LSI Logic / Symbios Logic 53c1010 66MHz  Ultra3 SCSI Adapter"
  Vendor: pci 0x1000 "LSI Logic / Symbios Logic"
  Device: pci 0x0021 "53c1010 66MHz  Ultra3 SCSI Adapter"
  SubVendor: pci 0x110a "Siemens Nixdorf AG"
  SubDevice: pci 0x6030 
  Revision: 0x01
  Driver: "sym53c8xx"
  Driver Modules: "sym53c8xx"
  I/O Ports: 0x2000-0x20ff (rw)
  Memory Range: 0xfe002000-0xfe0023ff (rw,non-prefetchable)
  Memory Range: 0xfe000000-0xfe001fff (rw,non-prefetchable)
  IRQ: 5 (240 events)
  Module Alias: "pci:v00001000d00000021sv0000110Asd00006030bc01sc00i00"
  Driver Info #0:
    Driver Status: sym53c8xx is active
    Driver Activation Cmd: "modprobe sym53c8xx"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
